Safety and standards

|

Newborn Set™: Safety and standards

To further increase the backward stability of the Tripp Trapp® chair, replaceable, extended rear gliders (“Extended Gliders”) have been developed for the Tripp Trapp® chair.

Always use the Tripp Trapp® Extended Gliders while the chair is being used with the Tripp Trapp® Newborn Set™. The Tripp Trapp® Extended Gliders have two different positions.

Always use it with the Extended Gliders in the rear position when Tripp Trapp® Newborn Set™ is combined with the Tripp Trapp® chair.

 
 

Safety Warnings

WARNING: DO NOT USE THIS PRODUCT UNTIL YOU HAVE THOROUGHLY READ AND UNDERSTOOD THE TRIPP TRAPP® CHAIR USER GUIDE.

WARNING:

NEVER use the Tripp Trapp® chair without any gliders.

WARNING:

NEVER let your child play around the Tripp Trapp® chair if it is not in the intended position for use, and never let your child play around the Tripp Trapp® chair unsupervised.

WARNING:

BE AWARE OF THE RISK THAT A CHILD CAN PUSH WITH ITS FEET AGAINST OBJECTS (E.G. TABLE, WALL, KITCHEN COUNTER) AND CAUSE THE TRIPP TRAPP® CHAIR TO TIP OVER.

WARNING:

BE AWARE OF THE RISK THAT A CHILD CAN PUSH WITH ITS FEET AGAINST THE FLOOR AND CAUSE THE RECLINED CRADLE TO SLIDE BACKWARDS. THIS MAY BE DANGEROUS IF THE FLOOR HAS STEPS OR DIFFERENT LEVELS, IS UNEVEN OR THERE IS A STAIRCASE NEARBY.

WARNING:

BE AWARE OF THE RISK THAT IF THE RECLINED CRADLE IS PLACED ON A SLOPING FLOOR, THE RECLINED CRADLE MAY TIP OVER BACKWARDS OR SIDEWAYS.

Download and read the Tripp TrappTripp Trapp Newborn Set User Guide® Newborn Set™ Userguide before you use this product.

Extended Glider assembly:

 
 

1

Place your Tripp Trapp® chairupside down on a table. Put a piece of cardboard underneath to protect your table top.

 
 

2

Remove the original, short rear glider and dispose of it. This glider will not be usable any more. Short replacement gliders (for the period subsequent to the Extended Glider period) are included in the glider set.

 
 

3

Place the brass insert in the hole shown on the picture. Make sure it is level with the underside of the Tripp Trapp® leg. NOTE! If you place the brass insert in the wrong hole, the Extended Glider will not function as intended.

 
 

4

Attach the Tripp Trapp® Extended Glider to the Tripp Trapp® chair, in the rear position. The rear position ensures maximum extended functionality of the glider.

 
 

5

When you no longer require the additional safety provided by the rear position of the Extended Glider, either adjust it to the foremost position or replace the Extended Glider with the short replacement rear glider that was included in the glider set.