Stokke® Crusi™

The Stokke® Crusi™ stroller can be used up to the approx. age of 3 years.

The weight limit for the Carry Cot is 9kg /20 lbs. A general indication is that the Stokke® Crusi™ Carry Cot can only be used until the child is able to sit up unaided.

The weight limit for the regular seat and Sibling Seat is 15 kg / 33 lbs or until the child reaches a height of 95 cm/37.5’’.

The Stokke® Stokke® Crusi™ can be fitted with a combination of the Carry Cot and Sibling Seat, the regular seat and Sibling Seat, or a combination of either the Stokke® iZiSleep™ or Stokke® iZi Go™ car seat and the Sibling Seat . It is not possible to fit the Stokke® Crusi™ with 2 Sibling Seats.
Car seat adapters, such as those available for the Stokke® Xplory® stroller, are not available for the Stokke® Crusi™ stroller. The reason for this is that the car seat brands which are compatible with Stokke® car seat adapters have harnesses exposed at the back side.  This would present a safety concern when such a car seat is used in the sibling configuration of the Stokke® Crusi™ stroller, as the child seated in the lower seat could grab on to the car seat harness. As a car seat solution for the Stokke® Crusi the Stokke® iZi Go™ or iziSleep™ car seats are available. The harnesses on these models are concealed and safe for use when a child is seated below it in the Crusi™ Sibling Seat. Everything we do is in the best interest of the child and sometimes that does pose limits to the compatatbility of our products with products or product components from other manufacturers.
The Stokke® Crusi™ Carry Cot cover, Canopy (hood) and visor should be hand washed. The outer lining can be wiped with a damp cloth, the inner lining and mattress cover can be machine washed at 40° C.
The seat used for Stokke® Crusi™ is  identical to the one used for Stokke® Xplory®  . Their respective Carry Cots, however, are different and not interchangeable.
The relevant European safety standard for strollers, EN 1888, specifies a minimum angle of 150° between seat bottom and backrest for it to be suitable for use from birth.
The Stokke® Xplory® /Crusi™ Seat does not comply with this specification, which is why, in the EU, it is not accepted for use under the age of 6 months. In the UK, however, a different standard applies which does not include the above requirement and therefore the Stokke® Xplory® /Crusi™ Seat is deemed suitable for use from birth in the UK.
The Stokke® Crusi™ chassis is compatible with all Stokke® Xplory® and Crusi™ seats, even those of earlier Stokke® Xplory® models. However, when using seats of earlier Stokke® Xplory® models in combination with the  Stokke® Crusi™ Sibling Seat, only seats with serial numbers 280000 or higher have been adapted and can be used in the sibling solution.
No. It has a sibling seat.