JetKids™ by Stokke® CloudSleeper™ Inflatable Kids' Bed

The CloudSleeper™ has a removable and machine-washable cover, made of water repellent material on the bottom side and comfortable air mesh on top. These materials allow you to use the CloudSleeper™ on both indoor and outdoor adventures.

The inflatable base is made of light and durable TPU-coated nylon, similar to what is used on high-end hiking mattresses, for example. The removable and machine washable cover is made of polyester air mesh on the top, combined with water repellent polyester on the bottom side.

You can wash the cover in the washing machine at a recommended 30 degrees Celsius cycle. We recommend 30 degrees Celsius (cold wash). However, 40 degrees Celsius (warm wash) is also an option. To dry, we recommend putting the cover on the base, inflate it, and let dry while inflated. To clean the inflatable base, wipe off any dirt or stains using a wet cloth.

There is clear instruction on the packing cube. After you receive the product, take out the TPU base and the air mesh cover, unfold them, put the air mesh cover over the base, open the valve cap on the pump and close the valve cap at the opposite end and then use your both hands or foot to push the integrated pump to pump the mattress up. You can also find clear how-to videos on our youtube channel.

The inflation takes around 1 minute. All in all, removing the CloudSleeper™ from the compression cube, unfolding, and inflating it would typically take approximately 2 minutes.

No, the CloudSleeper™ comes with an integrated pump. You will not need any additional or external tools to inflate it. Inflate by pushing with both hands down on the pump area or by using your foot. When inflating, remember to have the valve cap open on the pump and close the deflation valve at the opposite end. There is also a handy quick guide on the packing cube.

After usage, simply open the valve cap at the opposite end of the pump and roll up the mattress firmly one time to deplete all air. Then unroll and fold along the numbered and dotted lines printed on the back. Finally, put the mattress back into the packing cube and close the packing cube with the zipper. If needed, you may also use the additional zipper to compress the CloudSleeper™ further.

It takes around 2 minutes to pack down.

CloudSleeper™ includes an inflatable base, a removable air mesh cover with water repellent fabric on the bottom side, and a custom-made packing cube. Both the cover and packing cube come with printed instructions for usage and packing.

In normal circumstances, the CloudSleeper™ stays inflated for weeks and should not leak at all. However, as air expands with increasing temperature and contracts when cooled, you might experience some variation in firmness when, for example, moving the CloudSleeper™ from a hot to a cold area and vice versa. You can adjust the firmness at any time by giving it a few pushes on the pump area or releasing some air.

These are for making it easy and quick to stow the CloudSleeper™ back into the packing cube. After use, open the deflation valve and roll up the CloudSleeper™ one time, starting from the pump side. Then unroll, and fold the CloudSleeper™ along the dotted lines, starting with lines number 1 and 2.

CloudSleeper™ comes with a global warranty of 2 years from the day of purchase.

Yes! The CloudSleeper™ fits perfectly inside the BedBox and still leaves some space available for some of your child’s personal belongings.

The CloudSleeper™ is designed for children three years and up to approximately 10 years (150cm / 4′ 11″).

Babies typically have other solutions, like foldable travel cots, cribs etc. We wanted to make a travel bed for children from three years and upwards as we saw the lack of good products in the market for this age group. In addition, the few options we saw were old-fashioned plastic/PVC inflatable beds, which are bulky, heavy, and not very suitable for travel.

No, we do not recommend that. The CloudSleeper™ is tested for its intended user age, which is 3 years and upwards.

The CloudSleeper™ weights only 1.4kgs/3lbs.

The CloudSleeper™ is tested for a max weight of 150lbs/68kg.

The CloudSleeper™ when inflated is 150 x 75 x 17 cm / 59 x 29.5 x 6,7 inches.

When you pack the CloudSleeper™ down in the packing cube and fully compress it, it is 38 x 28 x 10 cm / 15 x 11 x 4 inches.