스토케 슬리피 체인저

NEW

타원형 체인저​

보너스제품
  • 스토케 슬리피 드레서에 안전하게 부착 가능​
  • 보호면이 있는 발수 교환 패드
  • 기계 세탁 가능한 탈부착식 교환 패드​

색상:
화이트

Selection will refresh the page with new results
close

색상:
화이트

Selection will refresh the page with new results
AR 기능이 있는 기기에서 해당 페이지를 방문하시면, AR로 제품을 만나보실 수 있습니다
가장 가까운 매장 찾기
개요
사용 방법
FAQ
악세서리 & 부품
제품 세부 사항

타원형 체인저​

체인저는 스토케 슬리피 드레서 위에서 안전하게 사용 할 수 있습니다. 보호면과 패딩 매트리스는 아이가 안전하고 편안하게 기저귀를 갈 수 있는 환경을 조성합니다. ​체인저는 아이와 눈을 맞추며 사용할 수 있는 높이로 설정하시는 것을 권장하며, 베이스 유닛과 사용하시는 공간에 따라 옆으로 서거나 부모 마주 보기의 자세 모두 선택하실 수 있습니다. ​보호면이 있는 발수 교환 패드가 함께 제공됩니다. 이 교환 패드는 연약한 아이 피부에 부드럽게 닿고, 탈부착이 가능하며 기계 세탁이 가능합니다.
설명서

제품 사이즈(cm/in): 80 x 53.7 x 10 / 31.5 x 21.1 x 3.9 무게(kg/lbs): 4.5 / 9.9 사용 가능 연령: 최소 0 ~ 최대 12 (개월) 사용 가능 체중(kg/lbs): 최대 11 / 24

소재 세부 정보

소재: 체인저: 너도밤나무 합판 체인저 바닥: MDF 소재 텍스타일: 커버: 80% 폴리에스터/20% 면 충전재: 50% 엘라스테렐-피/50% 폴리에스터

호환성

  • 스토케 슬리피 드레서
  • 스토케 홈 드레서와 호환되지 않습니다.
    스토케 슬리피 기저귀 교환대와 호환되지 않습니다.
  • this item is included 고무 다리 4개
  • this item is included 스토케 슬리피 체인저
  • this item is included 스토케 슬리피 체인저 패드
스토케 슬리피 체인저 SNS에서 찾아보기

유지관리

깨끗한 젖은 천으로 닦고 여분의 물기를 닦아냅니다. 체인저 패드: 40°C 온수에서 기계 세탁. 표백제 사용이나 드라이클리닝은 하지 마십시오. 회전 건조하거나 다림질하지 마십시오. 세척 전에 PE 보드와 내부 쿠션을 제거하십시오

  • Stokke® Sleepi™ Dresser, Changer, Changing table

  • What are the weight and dimensions of the Stokke® Sleepi™ Changer ?

    The dimensions and weight of the Stokke® Sleepi™ Changer when packaged in the box are: 83 x 57 x 12 cm
    When assembled, the measurements are as follows: 80 x 53,7 x 10 cm Weight: 4,5 kg

  • How should I clean and maintain my Stokke® Sleepi™ Dresser?

    To keep your Stokke®Sleepi™ Dresser clean, wipe it with a soft, damp (not wet!) cloth.
    Wipe down with a dry cloth until completely dry.
    Refrain from using a micro fibre cloth or household detergents as they may damage the finish of the crib. Colours may change if the products are exposed to sunlight.

  • x_

    If your Stokke® Sleepi™ Dresser is damaged, we kindly ask you to contact the shop where you originally purchased the product and provide them with information regarding the damage as well as the dresser's serial number (found on the inside of the dresser and inside one of the drawers respectively). If it is inconvenient to contact the original retailer, you can also contact any other Stokke® retail partner that sells the Stokke® Sleepi™ for assistance. At the top of our website www.stokke.com, under 'Find your retailer', you can search for your nearest one.

    Depending on the type of problem, the retailer will be able either to order a replacement part on your behalf or to have the dresser replaced in its entirety. Whether this can be done under the terms of Stokke® product warranty will depend on whether the claim is made within the warranty period. For more information on Stokke® product warranty and how to register your Stokke® Sleepi™ Dresser for Extended Warranty (3 years after the date of purchase), please follow this link: http://w.stokke.com/#/

    Replacements for missing parts of the Stokke® Sleepi™ Dresser, can be ordered directly from your local Stokke® retailer or from stokke.com, depending on your country of purchase.

    The details you enter in your registration must correspond to those on the proof of purchase. You are also asked to provide the serial numbers of the cradle, which you will find on a sticker on the inside of the dresser as well as on the inside of one of the drawers. After completing the registration, the registration certificate will be sent to you via email. You can place your claim for replacement parts with a retailer selling the Stokke® Sleepi™ producing both the registration certificate and the original proof of purchase.

    You can also contact any other Stokke® retail partner that sells the Stokke® Sleepi™ for assistance in this matter. You can search for your nearest one via the link below: http://www.stokke.com/global/Sleepi#findstore

  • x_

    The dimensions and weight of the Stokke® Sleepi™ Dresser when packaged in the box are:
    Box 1 of 2: 115 x 60 x 9 cm
    Box 2 of 2: 96 x 72 x 8 cm
    When assembled, the measurements are as follows: 87,2 x 53,4 x 88,5 cm
    Weight: 46 kg
    (2 Boxes)

  • x_

    In order to clean your Stokke® Sleepi™ Changer, wipe it with a soft, damp (not wet!) cloth, then wipe down with a dry cloth until completely dry.

    Refrain from using a micro fibre cloth or household detergents as they may damage the finish of the changer. Colours may change if the wood is exposed to the sunlight.

    The Stokke® Sleepi® Changer Pad is water repellent and easy to wipe clean. The Core can be rinsed in the shower or sink. The Changer Mattress Cover can be washed with 40°C (140 Fahrenheit). Do not bleach or dry clean. Do not tumble dry or iron. Remove PE board and inside cushion before washing

  • x_

    Stokke® Sleepi™ Dresser Screw Bag 585000
    Stokke® Sleepi™ Dresser Drawer Slider Set 585300
    Stokke® Sleepi™ Changing Table Screw Bag 585100
    Stokke® Sleepi™ Changer Screw Bag 585200
    Stokke® Sleepi™ Changer Pad 584301

  • x_

    1. Mark a hole for the first wall attachment 85,1 cm/33,5 in vertical.
    2. Mark a hole for the second wall attachment, 72 cm/28,35 in horizontal from the first hole.
    3. Depending on your wall, drill holes for appropriate wall screw/plugs that fits your wall.
    4. Please find more information in the user guide, on stokke.com or contact your local hardware retailer.
    5. Use short side and mount the wall attachment and adjust them to correct height, to slide into the dresser. 86,6 cm/34,10 in
    6. Push the dresser towards the wall and into the openings in the Dresser backplate.
    7. Attach the wall attachment to the dresser using the screws in the wall attachment screw bag.

추가 FAQ 로드

최근 조회 제품

보너스 제품
보너스제품
보너스 제품