Customer Service
FAQ

FAQ

FAQs

Tripp Trapp®

The clear difference are customer preferences, features and accessories. Both highchairs encourage the family to sit together from birth. The clear differences are in features and accessories.

The Tripp Trapp® is a high chair that grows with the child, from birth to adulthood. The ergonomic design allowing the child to sit comfortably with the foot plate.

The Steps™ is an All-in-One seating system, that starts with a bouncer which can be used from birth, transcending into a Baby Set with a tray to a high chair that can be used until 10 years of age.

After use, specifically during feeding, we recommend that you wipe the Tripp Trapp® and Tripp Trapp® Baby Set with a damp cloth.

No, only the Tripp Trapp® cushions in the `Silhouette´ range are water-repellent.

When In the box, the Stokke® Tripp Trapp® chair measures 78 x 50 x 60 cm. and weighs 7 kg. Dimensions of the chair after assembly are 78 x 49 x 46 cm.

All Stokke® furniture is made from wood, which, as a natural product, may show a degree of natural variance. Also, we source our wood from several sustainable sources and we cannot therefore guarantee individual chairs will have come from the same stand of trees. Finally, the colour of the wood may change over time under the influence of UV light and oxygen.

Should the Stokke® Tripp Trapp® chair seem unstable after assembly, we ask you to proceed as follows: Loosen all screws slightly, make sure the chair is standing on a level surface, have an adult sit on the upper plate, and tighten the screws one by one – alternating between top left, bottom right and so on. The chair should now be stable. If this is not the case, please submit a claim with the retailer you purchased your Tripp Trapp® from, providing them with the serial number (which is located on the bottom of one of the siderunners) and both of the chair's legs, so that they can order a replacement pair for you.

The serial number of the Tripp Trapp® can be found underneath the right side of the chair.

The Stokke® Tripp Trapp® chair has been designed for use at tables with a standard height, i.e. between 72 and 76 cm. It is therefore not suitable for use at bar tables.

The current Tripp Trapp® Baby Set™ is compatible with all Tripp Trapp® chairs produced after June 2006. If your chair was manufactured between June 2006 – May 2013, the ® Baby Set would still fit, but the Extended Gliders included with the Baby Set would not. The serial number and production date are printed on the bottom of the right side leg.

If you are unable to make out this information on your Tripp Trapp® chair, you can also measure the gap between the two back rest pieces: prior to June 2006, this measured approx. 2.5 cm, while on chairs since June 2006 it is approx. 3.5 cm. Chairs produced before June 2006 are not compatible with the current ® Baby Set.

For GS Mark (Tested Safety) certification, the Tripp Trapp® chair was tested according to various standards. One of these is a standard called DIN 68 878, which is a quality norm for adult chairs. This standard involves a dynamic test where 85 kg is placed on the seat, which is then tilted backwards 6000 times. The Tripp Trapp® chair passes all the tests in that standard, which means a load of up to 85 kg can be safely placed on the chair.

For safety reasons please do not remove the label. This label has important information. Removing the sticker may damage the lacquer or leave glue residue.

Back to Customer Service

Quicklinks

Product Support
Product Registration and Warranties
Retailer
Legal
Contact Us

FAQ

FAQs

Tripp Trapp®

How do I clean my Tripp Trapp®?

Are all Stokke® Tripp Trapp® Cushions water-repellent?

What are the weight and dimensions of the Stokke® Tripp Trapp®?

I own several Stokke® Tripp Trapp® chairs which are nominally of the same colour but look different. Can this be?

My new Stokke® Tripp Trapp® chair seems wobbly after assembly. Did I do something wrong?

Where do I find the serial number of my Tripp Trapp®?

Can I use the Stokke® Tripp Trapp® chair at our bar table?

How do I know whether my Tripp Trapp® chair is compatible with the Stokke® Baby Set™ or Newborn Set™?

What is the maximum recommended load that can be safely placed on the Stokke® Tripp Trapp® chair?

Can I remove the safety sticker on my Tripp Trapp®?

Sign up for our newsletter!