The Stokke® Home™ Bed has been designed specifically to provide a sturdy bed for your child with excellent mattress support. It has been successfully tested to carry the maximum weight of 200 kg/ 450 lbs. This means that it is strong enough for two adults to sit on, as they would a sofa. The weight limit has however been set to 50 kg for the occupant because the bed can withstand rough movements of a child of 50 kg, but an heavier child or an adult weighing much more could not do the same.” Ler mais

There are three positions for the Stokke® Home ™ Bed Guard so you can choose your preferred room solution. Ler mais

All Stokke® products fall under the respective national guaranty and warranty guidelines. The Stokke® Home™ Bed and Dresser comes with a 3 year Extended Warranty when registering the Stokke® Home™ products through the Stokke® website. You can go to our registration page by following the link: https://guarantee.stokke.com Ler mais

"The dimensions and weight of the Stokke® Home™ Bed when packaged in the box are: Box 1 of 2 (weight 15kg (33lbs) / L: 78cm (30,7’’) / W: 9cm (3,5’’) / H: 137cm (54’’)) Box 2 of 2 (weight 20kg (44lbs)/ L: 74cm (29’’)/ W: 11cm (4,3’’) / H: 137cm (54’’)) When assembled, the measurements of the Stokke® Home™ Bed are as follows: L: 137 cm (54"") / W: 75 cm (29,5"") / H: 164 cm (64,5"") Weight: 35 kg / 77 lbs (2 Boxes) " Ler mais

In order to clean your Stokke® Home™ Changer, wipe it with a soft, damp (not wet!) cloth, then wipe down with a dry cloth until completely dry. Refrain from using a micro fiber cloth or household detergents as they may damage the finish of the changer. Colors may change if the wood is exposed to the sunlight. The Stokke® Home® Changer Mattress is water repellent and easy to wipe clean. It can be hand washed at 30°C (86 Fahrenheit). Do not tumble-dry. The Changer Mattress Cover can be washed on 60°C (140 Fahrenheit). Ler mais

To prevent any kind of dangerous openings between the Stokke® Home™ Changer and the rails, the side position has been deemed and approved as safest. You notice that Stokke® Home™ Changer is fastened properly when it clips into place. Ler mais

"The dimensions and weight of the Stokke® Home™ Changer when packaged in the box are: L: 67cm (26,3’’) / W: 8cm (3,1’’) / H: 78cm (30,7’’)) Weight 24 kg (53 lbs) When assembled, the measurements are as follows: L: 78cm (31"") / W: 53cm (21"") / H: 15cm (6"") Weight: 10 kg" Ler mais

Ler mais

Stokke® Home™ Cradle may be cleaned and maintained in the following way: Remove all textiles, including the mattress and machine wash at 40° Celsius/ 104° Fahrenheit. Do not tumble dry. To clean the wood stand: wipe it with a soft, damp (not wet!) clothe, then wipe it down with a dry clothe until completely dry. Refrain from using a micro fiber cloth or household detergents as they may damage the finish of the cradle. Colours may change if the wood is exposed to the sunlight. Ler mais

The maximum recommended and tested weight for the Stokke® Home™ Cradle is 9kg (19,8 lbs). One can usually notice that the baby has outgrown the Stokke® ™ Cradle when it is able to pull themselves up on their elbows and knees. Ler mais

Yes. You can place the two Cradles towards each side of the bed with a space between. Please note: This can only be done as long as the babies are small enough for the Stokke® Home™ Cradles. As soon as the children outgraw the Stokke® Home™ Cradle, we highly recommend one infant per bed. Ler mais

"The dimensions and weight of the Stokke® Home™ Cradle when packaged in the box are: L: 55cm (21,6’’) / W: 15cm (5,9’’) / H: 82cm (32,2’’)) Weight 8,6 kg (17,6 lbs) When assembled, the measurements are as follows: L: 75cm (29"") / W: 50cm (20"") / H: 73cm (28.5"") Weight: 7 kg / 15,4 lpb " Ler mais

The Stokke® Home™ Cradle User guide can be found in the pocket underneath the cradle's textile. Ler mais

The BeSafe iZi Go Modular X1 i-Size fits onto the same base as its previous model, so that it can absolutely be used as part of the iZi Modular concept. Ler mais

This seat can be used up to max. 13 kg. Ler mais

No, it is not allowed to add something to the sides of the child, as the seat is not tested and approved this way. The seat has been tested thoroughly with various dummy sizes representing babies' measurements and has passed all tests successfully, so that adding more to the side is not needed for safety. Ler mais