스토케 젯키즈 클라우드슬리퍼 공기주입형 아동 침대

국내, 해외 어디든 소지할 수 있는 아동용 여행 침대

보너스제품
  • 경량 나일론 소재의 내구성이 뛰어난 TPU 매트리스는 젖은 천만 있으면 손쉽게 세척할 수 있습니다. 
  • 통기성 좋은 에어 메시 커버가 장착된 시트로 아이의 체온을 조절할 수 있어 최상의 편안함을 선사합니다.
  • 클라우드슬리퍼의 스마트 이중 지퍼 패킹 큐브는 최소한의 노력으로 보관하고 운반할 수 있게 합니다.
  • 전체가 측면 범퍼로 둘러싸인 에어 침대는 집 밖에서도 안전하게 아이를 재울 수 있습니다. 
  • 2021 레드닷 어워드 제품 부문에서 최우수상 수상

색상:
화이트

Selection will refresh the page with new results
close

색상:
화이트

Selection will refresh the page with new results
179,000 원,
(모든 가격은 세금을 포함함)

출시예정

(모든 가격은 세금을 포함함)
179,000 원,
Configuration
AR 기능이 있는 기기에서 해당 페이지를 방문하시면, AR로 제품을 만나보실 수 있습니다
배송 및 환불
개요
사용 방법
FAQ
악세서리 & 부품
(모든 가격은 세금을 포함함)
179,000 원,

제품 세부 사항

국내, 해외 어디든 소지할 수 있는 아동용 여행 침대

클라우드슬리퍼는 유아 및 3세 이상 어린이를 위한 올인원 공기주입형 여행용 침대입니다. 베낭이나 휴대용 캐리어안에 쉽게 넣을 수 있도록 제작되었습니다. 가벼운 제품으로 부품이 따로 필요 없는 일체형 제품입니다. 어린이를 위한 진정한 혁신이 구현된 공기주입식 여행용 침대
  • 고급형 하이킹 매트리스와 내구성이 뛰어난 TPU 코팅 나일론 소재의 공기주입식 매트리스 
  • 침대를 둘러싸고 있는 측면 범퍼로 아이가 잘 때 더 안전하게 지켜줍니다. 
  • 에어 메시 커버가 장착된 시트는 아이의 체온 조절을 도와 포근하게 지낼 수 있도록 합니다.  
  • 발수 기능을 갖춘 하단 커버로 세척이 쉽습니다.  
  • 통합형 펌프로 1분 이내면 손이나 발로 공기를 침대에 쉽게 주입할 수 있습니다. 
  • 이중 지퍼 디자인의 패킹 큐브로 간편하게 보관하고 손쉽게 운반 가능합니다. 

설명서
JetKids by Stokke® CloudSleeper™ view 1
  • RedDot Award Best of Best 2021 CloudSleeper™ JetKids™ by Stokke® Inflatable Kids’ Bed

제품 사이즈(cm/in): 150 x 75 x 17 / 59.1 x 29.5 x 6.7 무게(kg/lbs): 1.4 / 3.1 사용 가능 연령: 최소 36 (개월) 사용 가능 체중(kg/lbs): 최대 68 / 149.9

소재 세부 정보

소재: TPU 매트리스: 강력하고 내구성이 뛰어난 경량 40D 나일론. TPU 코팅 처리된 PVC Free 제품입니다. 상단 커버: 통기성 좋고 편안한 에어 메시(3D 메시) - 폴리에스터 100%. 하단 커버: 강력하고 내구성 뛰어난 발수성 커버 - 폴리에스터(PU 코팅) 100%.

호환성

    스토케 젯키즈 베드박스와 호환 가능
  • this item is included 이중 지퍼가 달린 휴대용 패킹 큐브
  • this item is included 에어 메시 커버와 발수� 하단 커버가 포함된 전용 시트
  • this item is included TPU 코팅 처리된 나일론 베이스 매트리스
JetKids by Stokke® CloudSleeper™, , WhatsIncl view 1
스토케 젯키즈 클라우드슬리퍼 공기주입형 아동 침대 SNS에서 찾아보기

유지관리

TPU 매트리스: 젖은 천으로 먼지나 얼룩을 닦아냅니다. 에어 메시 커버: 세탁기 사용시, 30℃ 온도의 물로 세탁 가능. 건조할 때는 커버를 베이스에 씌우고 매트리스를 부풀린 다음 자연 건조하는 것이 좋습니다. 자연 건조 후에는 패킹 큐브에 넣어서 보관하십시오.

조립 지침
  • What is the CloudSleeper™?

    The CloudSleeper™ is the compact and lightweight children's travel bed from 3 years and above. It is a travel bed for home and away, an inflatable bed with no loose parts and an integrated pump.

  • How does the packing cube work?

    The packing cube of the CloudSleeper™ is a design that allows you to compress the CloudSleeper™ even more for packing and ease of transport. It is designed with double layered zipper. By closing both layers, you can push more air out of the CloudSleeper™ and compress it to the smallest size.

  • Where can I use the CloudSleeper™?

    Because of its compact and light weight design, the CloudSleeper™ is the perfect bed for indoor and outdoors activities at home and away such as sleepovers, camping, family reunions, hotels, and others.

  • Can I use the CloudSleeper™ outdoors as well?

    The CloudSleeper™ has a removable and machine-washable cover, made of water repellent material on the bottom side and comfortable air mesh on top. These materials allow you to use the CloudSleeper™ on both indoor and outdoor adventures.

  • What are the materials of the CloudSleeper™?

    The inflatable base is made of light and durable TPU-coated nylon, similar to what is used on high-end hiking mattresses, for example. The removable and machine washable cover is made of polyester air mesh on the top, combined with water repellent polyester on the bottom side.

  • How do I clean the CloudSleeper™?

    You can wash the cover in the washing machine at a recommended 30 degrees Celsius cycle. We recommend 30 degrees Celsius (cold wash). However, 40 degrees Celsius (warm wash) is also an option. To dry, we recommend putting the cover on the base, inflate it, and let dry while inflated. To clean the inflatable base, wipe off any dirt or stains using a wet cloth.

  • How do I inflate the CloudSleeper™?

    There is clear instruction on the packing cube. After you receive the product, take out the TPU base and the air mesh cover, unfold them, put the air mesh cover over the base, open the valve cap on the pump and close the valve cap at the opposite end and then use your both hands or foot to push the integrated pump to pump the mattress up. You can also find clear how-to videos on our youtube channel.

  • How long does it take to inflate?

    The inflation takes around 1 minute. All in all, removing the CloudSleeper™ from the compression cube, unfolding, and inflating it would typically take approximately 2 minutes.

  • Do I need a pump to inflate the CloudSleeper™?

    No, the CloudSleeper™ comes with an integrated pump. You will not need any additional or external tools to inflate it. Inflate by pushing with both hands down on the pump area or by using your foot. When inflating, remember to have the valve cap open on the pump and close the deflation valve at the opposite end. There is also a handy quick guide on the packing cube.

  • How do I pack it down after I use the CloudSleeper™?

    After usage, simply open the valve cap at the opposite end of the pump and roll up the mattress firmly one time to deplete all air. Then unroll and fold along the numbered and dotted lines printed on the back. Finally, put the mattress back into the packing cube and close the packing cube with the zipper. If needed, you may also use the additional zipper to compress the CloudSleeper™ further.

  • How long does it take to pack the CloudSleeper™ down?

    It takes around 2 minutes to pack down.

  • What comes with CloudSleeper™?

    CloudSleeper™ includes an inflatable base, a removable air mesh cover with water repellent fabric on the bottom side, and a custom-made packing cube. Both the cover and packing cube come with printed instructions for usage and packing.

  • How long does the CloudSleeper™ stay inflated?

    In normal circumstances, the CloudSleeper™ stays inflated for weeks and should not leak at all. However, as air expands with increasing temperature and contracts when cooled, you might experience some variation in firmness when, for example, moving the CloudSleeper™ from a hot to a cold area and vice versa. You can adjust the firmness at any time by giving it a few pushes on the pump area or releasing some air.

  • What do the dotted lines in the back of the CloudSleeper™ do?

    These are for making it easy and quick to stow the CloudSleeper™ back into the packing cube. After use, open the deflation valve and roll up the CloudSleeper™ one time, starting from the pump side. Then unroll, and fold the CloudSleeper™ along the dotted lines, starting with lines number 1 and 2.

  • What is the warranty for the CloudSleeper™?

    CloudSleeper™ comes with a global warranty of 2 years from the day of purchase.

  • Will the CloudSleeper™ fit inside the BedBox?

    Yes! The CloudSleeper™ fits perfectly inside the BedBox and still leaves some space available for some of your child’s personal belongings.

  • What is the age range for the CloudSleeper™?

    The CloudSleeper™ is designed for children three years and up to approximately 10 years (150cm / 4′ 11″).

  • Why is it that the CloudSleeper™ can only be used from 3 years?

    Babies typically have other solutions, like foldable travel cots, cribs etc. We wanted to make a travel bed for children from three years and upwards as we saw the lack of good products in the market for this age group. In addition, the few options we saw were old-fashioned plastic/PVC inflatable beds, which are bulky, heavy, and not very suitable for travel.

  • My child is not three years old yet, can he/she use the CloudSleeper™?

    No, we do not recommend that. The CloudSleeper™ is tested for its intended user age, which is 3 years and upwards.

  • How much does the CloudSleeper™ weight?

    The CloudSleeper™ weights only 1.4kgs/3lbs.

  • How much weight can the CloudSleeper™ take?

    The CloudSleeper™ is tested for a max weight of 150lbs/68kg.

  • What is the measurement for the CloudSleeper™ when it is inflated?

    The CloudSleeper™ when inflated is 150 x 75 x 17 cm / 59 x 29.5 x 6,7 inches.

  • What is the measurement for the CloudSleeper™ when it is packed down?

    When you pack the CloudSleeper™ down in the packing cube and fully compress it, it is 38 x 28 x 10 cm / 15 x 11 x 4 inches.

  • JetKids™ by Stokke® CloudSleeper™

추가 FAQ 로드
보너스 제품
보너스제품
보너스 제품