There are three options for newborn solutions that are suitable for Stokke® Scoot™: 1. For the best comfort of the child, we recommend Scoot™ Carry Cot. It is compatible with all models produced after Sep 2014 (after serial number 118AA0040583). 2. We also offer Scoot™ newborn insert if you do not go out with your newborn very often. It can be used in the Sleep position and comes with a detachable head support and feet support. It gives a good support to your baby and it is made of terry cloth. When the baby grows out of it, you can remove the head support and feet support and use it as a regular seat inlay. 3. Scoot™ Softbag is padded with a closed wind cover to protect newborns from harsh weather. It can be used in the Sleep position. Read More

Read More

Read More

All markets apart from US and Canada is certified for a child up to 15 kg. US and Canada are certified for a child up to 45 pounds/20.5kg. The shopping basket according to standard is certified up to 2 kg./4,4 pounds. Read More

Read More

Read More

Trace amounts of formaldehyde are naturally present in all wooden products. The varnish used for the Stokke® Sleepi™ range is formaldehyde-free while the resin has ultra low emission of formaldehyde. Formaldehyde levels fully comply with E1 requirements and the US TSCA/CARB certification standards. Read More

To keep your Stokke® Sleepi™ clean, wipe it with a soft, damp (not wet!) cloth. Wipe down with a dry cloth until completely dry. Refrain from using a micro fiber cloth or household detergents as they may damage the finish of the crib. Read More

• Always make sure the bumper is fixed correctly and tightly to avoid sagging. Check frequently that all the bumper ties are firmly tied to the crib rails. Please re-tie if necessary. • To ensure optimum airflow, always ensure the child is not sleeping with their face in direct contact with the bumper. • Remove the bumper when the child can sit unaided or pull themselves up to a standing position. Please note : Stokke® bumpers was replaced by the new Stokke® Mesh Liner in September 2022 Read More

The standards the Stokke® Bumpers comply with are: • ASTM F1917-12 – “Infant Bedding and Related Accessories” • BS 1877-10:2011+A1:2012 – “Domestic bedding. Specification for mattresses and bumpers for children’s cots, perambulators and similar domestic articles” • The above standards specifically aim to ensure safe design and sufficient care instructions for safe and proper use of a bumper. • Stokke® Bumpers have been tested for CO2 retention and results show no increase of CO2 in the crib environment with a correctly fitted Stokke® Bumper. • Stokke® Bumpers are designed with specific dimensions and materials to ensure optimum air flow. Please note : Stokke® bumpers was replaced by the new Stokke® Mesh Liner in September 2022 Read More

A mattress where they´ll sleep like a baby. For optimal safety and comfort, it´s important that a baby mattress is high-quality, firm and breathable. ​ A breathable mattress ensures that the air can circulate and remove the carbon dioxide exhaled by the baby. In this way, overheating is avoided. This is especially important when the little ones turn over onto their stomachs while sleeping and breathe into the mattress. ​ The Stokke® Sleepi™ mattress is made with multiple layers of breathable 3D mesh with a Sorona® Bicomponent Stretch fiber core to offer firmness, maximal airflow and to exceed the highest safety standards.​ Both the core and cover can easily be removed for washing. Cover is machine washable at 60º Celsius and core can be cleaned by rinsing. Comes with a wide range of coordinating protection covers and sheets. Mattress before September 2022 (100% Cotton Cover and PU foam core): The Stokke® Sleepi™ mattress offers optimal support for the child’s body, with a foam density of 35 kg/m3 and 40% compression at 3.7 kPa. The mattress used for the Sleepi™ Junior is somewhat thicker, as it is meant for use by older and therefore heavier children. The type of foam used in the mattresses (polyurethane) is widely used in mattresses and the product fully complies with the latest European safety standards for baby cribs. The Stokke® Sleepi™ provides a balanced ventilation system through the design of the mattress, mattress cover and bottom. To ensure optimal air circulation, the bottom side of the mattress has a wavy pattern specially designed to remove excess body heat. The bottom side of the mattress cover is made of a mesh material and the plywood base supporting it has large openings, which further enhance air circulation. Together, these features keep your baby cool and help prevent the growth of fungus. The Sleepi™ Cocomat is the certified fully organic alternative mattress to go with the Stokke® Sleepi™ Mini and Bed. It consists of organic coconut husk fibre (80%) and lambswool (20%), with covers of unbleached cotton. It has outstanding ventilation and insulation qualities which helps regulate your baby's body temperature, along with anti-dust mite qualities. Read More

The lacquers used for the Stokke® Sleepi™ range are water and polyurethane based. Both variants comply with the prevailing safety standard EN 71 - 3, ""European Standard, Safety for toys, Migration of certain elements/Toxic Heavy Metals"", devised to show whether soluble metals could be absorbed by the body should a child chew on or lick the paint of a product. The lacquers used for the Stokke® Sleepi™ contain no formaldehyde. In addition to this, the Stokke® Sleepi™ range complies with general European product safety standards for children's cribs and beds EN 716 and EN 1130. Read More

It is common to find dark particles in unbleached cotton, which has not undergone heavy chemical treatment. They are in fact remaining bits of the cotton seed coat. They can be considered proof of a natural material and are perfectly safe. All Stokke® Sleepi™ textiles including the mattress cover fulfil the highest Oeko Tex Standards for organic fabrics. Read More

The caster wheels which come with the Stokke® Sleepi™ Mini and Bed can only be used up to the stage when the side panel of the Sleepi™ Bed is removed to allow the child unaided access to the bed. The caster wheels must not be used under the Stokke® Sleepi™ Junior Bed, as this would jeopardise the stability of the bed. Read More

Mattress from August 2022 ( Cover: 100% Polyester, Filling: 40% elasterell-p / 60% Polyester) The Stokke® Sleepi™ mattress cover can be washed at Max 60°C/140ºF. Do not bleach or dry clean. Make sure to stretch it to size while still wet. Do NOT use a tumble dryer. The Core out of Sorona® Bicomponent Stretch fibers and Polyester (40% elasterell-p / 60% Polyester) should be rinsed with water and dry flat. Mattress before September 2022 (100% Cotton Cover and PU foam core): The Stokke® Sleepi™ mattress cover can be hand washed at 40 °C. Make sure to stretch it to size while still wet. Do NOT use a tumble dryer. The foam filling can be hand washed at 60 °C and/or rinsed with warm water. As for the Stokke® Sleepi™ Cocomat, the outer mattress cover is removable and machine washable at 60°C. We recommend the use of protection sheets in case of little spills or accidents. In such cases, quickly remove and wash outer covers. Inner materials dry quickly when aired and must not be machine washed. Read More

"At Stokke®, quality and safety are the main concern and we take great care in ensuring all our products meet current international safety standards for baby and children`s products. All Stokke® Sleepi™ wooden components are manufactured from cultivated beech, which makes them strong, solid and durable. The preservation of the environment is very important to Stokke®, therefore, we strictly adhere to responsible wood sourcing and processing from European forests. The lacquers used for the Stokke® Sleepi™ fully comply with the prevailing safety standard EN 71 - 3, ""European Standard, Safety for toys, Migration of certain elements/Toxic Heavy Metals"". Furthermore, the lacquer is completely free of formaldehyde. All Stokke® Nursery Textiles are approved by the International Oeko-Tex Association and certified according to Standard 100 by Oeko-tex, product class I which means they are free from harmful substances." Read More