Stokke® Xplory® Accessories

The Stokke® PramPack™ fits 99% of prams/strollers available in the market. If your stroller is not specifically listed on our website as compatible with the  Stokke® PramPack™, chances are still very high that it will fit. However, the surest way to test this is to visit a Stokke® retail partner stocking the PramPack™ and try it out.
The Stokke® Xplory® car seat adaptors are compatible with Xplory® strollers with serial numbers 24771 and up. Earlier models cannot be upgraded to fit the car seat adapters.

Our own Stokke® iZi Sleep™ by BeSafe® car seat, which was launched in 2010 and which is especially adapted to be mounted directly on the chassis of the Stokke® Xplory® stroller without the need for adapters, can be used on any Stokke® Xplory® chassis, regardless of the model or year of production. For more information on the Stokke® iZi Sleep™ car seat, please follow the link below:

The Stokke® Xplory® stroller was not originally designed to be used with a sibling board, simply because it did not exist at the time. In response to customer feedback over the first years our product development team worked hard to come up with an add-on solution that would not compromise the safety or stability of the stroller. They found that this could only be achieved by modifying the chassis in a way which cannot be carried out retroactively, on earlier Stokke® Xplory® strollers.

The Stokke® Xplory® Sibling Board was only introduced in October 2009 and it is therefore only compatible with Stokke® Xplory® strollers produced from that date on. To be more precise, it will fit on Stokke® Xplory® strollers with serial number 113464 and above. It goes without saying that it fits on all strollers of the new V3 model, launched in 2010.

Stokke® offers two car seats that can be used with Stokke® strollers without the use of adaptors. These are the Stokke® iZi Go™ by BeSafe® andthe Stokke® iZi Sleep™ by BeSafe™. When using these car seats with Stokke® strollers, no adaptor is needed. For those wishing to use another type of car seat, Stokke® offers Car Seat Adaptors making it possible to use selected models of car seats made by other manufacturers: Peg Perego and Maxi-Cosi with the Stokke® Scoot and the Stokke® Xplory®. We have provided a convenient chart illustrating which Stokke® Car Seat Adaptor is needed to connect selected car seats from the aforementioned brands with our Stokke® strollers. Due to its unique sibling solution configuration, there are no car seat adaptors for the Stokke® Crusi. Everything we do is in the best interest of the child and sometimes that does limit flexibility of our products to work with components from other manufacturers.
The Stokke® Xplory® Sibling Board can be attached to all Stokke® Xplory® Strollers chassis from serial numbers 113464 on. An upgrade of previous models is not possible.
The Stokke® Xplory® Car Seat Adaptors can be attached to all Stokke® Xplory® Strollers chassis from serial numbers 24770 on. An upgrade of previous models is not possible.
The measurements of the Stokke® PramPack™, when rolled up for storage, are as follows:

Length: 62 cm
Diameter: 25 cm
Weight: 4.2 kg

The dimensions when a stroller is packed inside the Stokke® Prampack™ will depend on the size of the stroller.