Provide your account email address to receive an email to reset your password.
Car seat adapters, such as those available for the Stokke® Xplory® stroller, are not available for the Stokke® Crusi™ stroller. The reason for this is that the car seat brands which are compatible with Stokke® car seat adapters have harnesses exposed at the back side. This would present a safety concern when such a car seat is used in the sibling configuration of the Stokke® Crusi™ stroller, as the child seated in the lower seat could grab on to the car seat harness.
As a car seat solution for the Stokke® Crusi the Stokke® iZi Go™ or iziSleep™ car seats are available. The harnesses on these models are concealed and safe for use when a child is seated below it in the Crusi™ Sibling Seat. Everything we do is in the best interest of the child and sometimes that does pose limits to the compatibility of our products with products or product components from other manufacturers.
The textiles are interchangeable between the Xplory®, Crusi™ and Trailz™ Seats (Stokke® Stroller Seat) as the Seat models are fully compatible and similar in dimensions. The textiles for the Scoot are not interchangeable or compatible with any of the Seats and/or Carry Cots of the Xplory®, Crusi™ and Trailz™.
The chassis and wheels of Stokke® Crusi™ clean easily, removing dirt, mud, and other outdoor elements simply with a damp cloth without the need for detergents or other cleaning chemicals.
Unlike other conventional strollers, all Stokke® Stroller and Crusi™ fabrics and textiles are easily removed as well as being fully machine washable at 40°Celsius/ 104° Fahrenheit.
If your Stokke® Crusi™ is damaged, we kindly ask you to contact the shop where you originally purchased the product and provide them with information regarding the damage as well as the stroller's serial number. If it is inconvenient to contact the original retailer, you can also contact any other Stokke® retail partner for assistance.
At the top of our website www.stokke.com, under 'Find your retailer', you can search for one nearest you. Depending on the type of problem, the retailer will be able either to order a replacement part on your behalf or to have the chair replaced in its entirety. Whether this can be done under the terms of Stokke® product warranty will depend on whether the claim is made within the warranty period, if it does not fall under the warranty period - costs may be incurred.
For more information on Stokke® product warranty and how to register your Stokke® Crusi™ stroller for Extended Warranty (3 years after the date of purchase), please follow this link: http://w.stokke.com/#/
Replacements for missing parts of the Stokke® Crusi™, such as wheels, can be ordered directly from your local Stokke® retailer. The details you enter in your registration must correspond to those on the original proof of purchase, both of which must be provided at your chosen authorized Stokke® retailer. You will also be asked for the serial number which can be found underneath Stokke® Crusi™. After completing the registration, the registration certificate will be sent to you via email. You can place your claim for replacement parts with the retailer producing both the registration certificate and the original proof of purchase.
You can also contact any other Stokke® retail partner for assistance in this matter. You can search for your nearest one via the link below: http://www.stokke.com/global/home#findstore
The parasol sold with the Stokke® Stroller has been tested by an independent testing institute for the level of UV protection it affords and it was found to have an Ultraviolet Protection Factor (UPF) of 50, which is classified as "Excellent Protection". However, it is still recommended to avoid exposing young children to direct sunlight for extended periods.
The Stokke® Crusi™ stroller can be used up to the approx. age of 3 years.
The weight limit for the Carry Cot is 9kg /20 lbs. A general indication is that the Stokke® Crusi™ Carry Cot can only be used until the child is able to sit up unaided.
The weight limit for the regular seat and Sibling Seat is 15 kg / 33 lbs or until the child reaches a height of 95 cm/37.5’’.
The relevant European safety standard for strollers, EN 1888, specifies a minimum angle of 150° between seat bottom and backrest for it to be suitable for use from birth.
The Stokke® Xplory® /Crusi™/Trailz Seat does not comply with this specification, which is why, in the EU, it is not accepted for use under the age of 6 months. In the UK, however, a different standard applies which does not include the above requirement and therefore the Stokke® Stroller Seat (for Stokke® Xplory® /Crusi™ /Trailz™) is deemed suitable for use from birth in the UK.
The new wheel sets, both Classic wheels and Terrain wheels, are not compatible with Crusi™, they are designed to the Trailz™ Chassis.
However, Crusi™ wheels will continue to be available as a spare part until fall 2019.
Stokke® has been listening to consumer feedbacks on their experiences and expectations for our products .
The two key improvement areas for Crusi™ are 1) Crusi™ users wants to have a rotation handle and 2) Crusi™ users would like to have more storage space for the shopping basket.
These improvement areas lead us to Trailz™ chassis with Classic wheels. From Oct/Nov, 2016, Stokke® will stop selling Crusi™ Chassis (apart from Korea and China) and offer Trailz™ with two wheel options. Classis wheel options are the same type of wheels we have used in Crusi™.
For consumer who does not have all terrain wheel needs, Trailz™ with classic wheels offers the same ride comfort as of Crusi™ with upgraded rotation handle and a 10kg capacity shopping basket. (Crusi™ chassis is with telescope handle and 5 kg capacity shopping basket)