Förhandsgranskning av varukorg
Stäng
Du har inga artiklar i din vagn
CloudSleeper™ JetKids™ by Stokke® Uppblåsbar resesäng
Resesäng för barn – hemma och på resan
Bonus produkt
https://www.stokke.com/SWE/sv-se/584601.html
- Har en slitstark TPU-madrass i nylon som enkelt kan rengöras med en fuktig trasa.
- Överdrag i andningsbart mesh-tyg reglerar barnets kroppstemperatur.
- Till skillnad från många resesängar är CloudSleeper™ kompakt och lätt att ta med sig, tack vare en förvaringspåse med dubbla dragkedjor.
- Med upphöjda kanter på båda sidor kan ditt barn sova tryggt på den uppblåsbara barnsängen när ni är iväg.
- Red Dot-priset
2021 inom
Variations
Försäljningspriskr 1.299,00,
Products
Översikt
Använd så här
Vanliga frågor
Reservdelar
(inkl. moms)
Försäljningspriskr 1.299,00,
Totalt
Produktinformation
Resesäng för barn – hemma och på resan
CloudSleeper™ är en uppblåsbar resesäng för barn från tre års ålder. Det är en kompakt resesäng som får plats i handbagaget. Liten och lätt, utan lösa delar.
En innovation inom uppblåsbara resesängar för barn
- Uppblåsbar madrass i slitstark nylon med TPU-beläggning som kan likställas med en solid vandringsmadrass
- Upphöjda kanter ger en säker och trygg sömn för små barn.
- Överdrag i mesh-tyg i två lager där första lagret hjälper till att reglera barnets kroppstemperaturen genom hela natten.
- Det nedersta lagret är vattenavvisande, lätt att hålla rent och passar på olika underlag.
- Pumpa upp sängen på mindre än en minut med hjälp av en integrerad pump.
- Påsen har dubbel dragkedja, vilket gör den kompakt och enkel att ta med sig.
X
Den ultimata resesängen
BEKVÄM OCH KOMPAKT RESESÄNG
1
Air mesh-överdrag
Det mjuka överdraget är gjort i mesh-tyg som bidrar till att reglera kroppstemperaturen och ge extra komfort, så att ditt barn får en god natts sömn, oavsett var ni är.
2
Integrerad pump
Luftmadrassen har en integrerad pump i TPU-underdelen, vilket gör madrassen enkel att blåsa upp utan antslutning av lösa delar. Du kan blåsa upp sängen manuellt på mindre än 1 minut.
3
Förvaringspåse
Sängen viks ihop i en smart och kompakt förvaringspåse som gör den enkel att ta med. Förvaringspåsen är designad med dubbla blixtlås, så att du kan komprimera sängen yttelrigare.
Hemma & på resa
Övernattande vänner och familj
Camping/glamping
Hotellvistelser, stugor och fritidshus
Husbilar
Specifikationer
Produktstorlek (cm/tum): 150 x 75 x 17 / 59.1 x 29.5 x 6.7 Vikt (kg/lbs): 1.4 / 3.1 Lämplig ålder: från 36 (månader) Lämplig vikt (kg/lbs): upp till 68 / 149.9
Material detaljerat
Material: TPU-madrass: Slitstark och lätt 40D-nylon. TPU-beläggning, fri från PVC. Överdrag: Andningsbart och bekvämt air mesh (3D-mesh) - 100 % polyester. Bottenöverdrag: Slitstark och vattenavvisande - 100 % polyester (med PU-beläggning)
Kompatibilitet
-
Kompatibel med JetKids by Stokke® BedBox
Detta ingår
- this item is included Bärbar förvaringspåse med dubbla blixtlås
- this item is included Drapålakan med mesh-överdrag och vattenavvisande undersida
- this item is included Madrass i TPU-belagd nylon
CloudSleeper™ JetKids™ by Stokke® Uppblåsbar resesäng i social
Använd så här / Dokument
Underhåll
- TPU-madrass: Torka av smuts eller fläckar med en våt trasa.
- Mesh-överdrag: kan maskintvättas i 30 grader.
- Vi rekommenderar att du lägger överdraget på sängen, blåser upp madrassen och låter det lufttorka innan du packar ner den i förvaringspåsen.
Monteringsanvisningar
Vanliga frågor
-
What is the CloudSleeper™?
The CloudSleeper™ is the compact and lightweight children's travel bed from 3 years and above. It is a travel bed for home and away, an inflatable bed with no loose parts and an integrated pump.
-
How does the packing cube work?
The packing cube of the CloudSleeper™ is a design that allows you to compress the CloudSleeper™ even more for packing and ease of transport. It is designed with double layered zipper. By closing both layers, you can push more air out of the CloudSleeper™ and compress it to the smallest size.
-
Where can I use the CloudSleeper™?
Because of its compact and light weight design, the CloudSleeper™ is the perfect bed for indoor and outdoors activities at home and away such as sleepovers, camping, family reunions, hotels, and others.
-
Can I use the CloudSleeper™ outdoors as well?
The CloudSleeper™ has a removable and machine-washable cover, made of water repellent material on the bottom side and comfortable air mesh on top. These materials allow you to use the CloudSleeper™ on both indoor and outdoor adventures.
-
What are the materials of the CloudSleeper™?
The inflatable base is made of light and durable TPU-coated nylon, similar to what is used on high-end hiking mattresses, for example. The removable and machine washable cover is made of polyester air mesh on the top, combined with water repellent polyester on the bottom side.
-
How do I clean the CloudSleeper™?
You can wash the cover in the washing machine at a recommended 30 degrees Celsius cycle. We recommend 30 degrees Celsius (cold wash). However, 40 degrees Celsius (warm wash) is also an option. To dry, we recommend putting the cover on the base, inflate it, and let dry while inflated. To clean the inflatable base, wipe off any dirt or stains using a wet cloth.
-
How do I inflate the CloudSleeper™?
There is clear instruction on the packing cube. After you receive the product, take out the TPU base and the air mesh cover, unfold them, put the air mesh cover over the base, open the valve cap on the pump and close the valve cap at the opposite end and then use your both hands or foot to push the integrated pump to pump the mattress up. You can also find clear how-to videos on our youtube channel.
-
How long does it take to inflate?
The inflation takes around 1 minute. All in all, removing the CloudSleeper™ from the compression cube, unfolding, and inflating it would typically take approximately 2 minutes.
-
Do I need a pump to inflate the CloudSleeper™?
No, the CloudSleeper™ comes with an integrated pump. You will not need any additional or external tools to inflate it. Inflate by pushing with both hands down on the pump area or by using your foot. When inflating, remember to have the valve cap open on the pump and close the deflation valve at the opposite end. There is also a handy quick guide on the packing cube.
-
How do I pack it down after I use the CloudSleeper™?
After usage, simply open the valve cap at the opposite end of the pump and roll up the mattress firmly one time to deplete all air. Then unroll and fold along the numbered and dotted lines printed on the back. Finally, put the mattress back into the packing cube and close the packing cube with the zipper. If needed, you may also use the additional zipper to compress the CloudSleeper™ further.
-
How long does it take to pack the CloudSleeper™ down?
It takes around 2 minutes to pack down.
-
What comes with CloudSleeper™?
CloudSleeper™ includes an inflatable base, a removable air mesh cover with water repellent fabric on the bottom side, and a custom-made packing cube. Both the cover and packing cube come with printed instructions for usage and packing.
-
How long does the CloudSleeper™ stay inflated?
In normal circumstances, the CloudSleeper™ stays inflated for weeks and should not leak at all. However, as air expands with increasing temperature and contracts when cooled, you might experience some variation in firmness when, for example, moving the CloudSleeper™ from a hot to a cold area and vice versa. You can adjust the firmness at any time by giving it a few pushes on the pump area or releasing some air.
-
What do the dotted lines in the back of the CloudSleeper™ do?
These are for making it easy and quick to stow the CloudSleeper™ back into the packing cube. After use, open the deflation valve and roll up the CloudSleeper™ one time, starting from the pump side. Then unroll, and fold the CloudSleeper™ along the dotted lines, starting with lines number 1 and 2.
-
What is the warranty for the CloudSleeper™?
CloudSleeper™ comes with a global warranty of 2 years from the day of purchase.
-
Will the CloudSleeper™ fit inside the BedBox?
Yes! The CloudSleeper™ fits perfectly inside the BedBox and still leaves some space available for some of your child’s personal belongings.
-
What is the age range for the CloudSleeper™?
The CloudSleeper™ is designed for children three years and up to approximately 10 years (150cm / 4′ 11″).
-
Why is it that the CloudSleeper™ can only be used from 3 years?
Babies typically have other solutions, like foldable travel cots, cribs etc. We wanted to make a travel bed for children from three years and upwards as we saw the lack of good products in the market for this age group. In addition, the few options we saw were old-fashioned plastic/PVC inflatable beds, which are bulky, heavy, and not very suitable for travel.
-
My child is not three years old yet, can he/she use the CloudSleeper™?
No, we do not recommend that. The CloudSleeper™ is tested for its intended user age, which is 3 years and upwards.
-
How much does the CloudSleeper™ weight?
The CloudSleeper™ weights only 1.4kgs/3lbs.
-
How much weight can the CloudSleeper™ take?
The CloudSleeper™ is tested for a max weight of 150lbs/68kg.
-
What is the measurement for the CloudSleeper™ when it is inflated?
The CloudSleeper™ when inflated is 150 x 75 x 17 cm / 59 x 29.5 x 6,7 inches.
-
What is the measurement for the CloudSleeper™ when it is packed down?
When you pack the CloudSleeper™ down in the packing cube and fully compress it, it is 38 x 28 x 10 cm / 15 x 11 x 4 inches.
-
JetKids™ by Stokke® CloudSleeper™
Nyligen visade
Bonus produkt