Up to 15 kg / 33 lbs 詳しくはこちら

You push the attachment points (grey dots) on both sides, pull the footrest out, turn the footrest upside down and slide it in over the attachment points. 詳しくはこちら

No, the Stokke® Clikk™ High Chair does not have a newborn set 詳しくはこちら

Yes, the Stokke® Clikk™ High Chair has a 2-in-1 baby set and tray. 詳しくはこちら

Yes, the tray is dishwasher safe. 詳しくはこちら

No, the Stokke® Clikk™ High Chair does not have extended gliders. 詳しくはこちら

Yes, you can remove the harness and wash it in the washing machine according to the instructions on the label : gentle wash, 40°C maximum. Make sure to attach the harness correctly afterwards. 詳しくはこちら

The BeSafe iZi Go Modular X1 i-Size differs from the previous version in 3 aspects: 1. It has a changed headrest area design which offers more internal space for the growing baby and does not require removing cushions anymore. 2. It features a different kind of baby cushion, the BeSafe Newborn Hugger™. This Newborn Hugger™ gives the baby more side support and stability while also featuring a wedge that lifts the baby's back instead of bottom for a flatter sitting angle. 3. Instead of soft foam, it features the Dynamic Force Absorber™ in the side wings of the seat shell for an optimized protection of the head area. 詳しくはこちら

Yes, the baby cushion [Newborn Hugger™] can be washed in one piece. 詳しくはこちら

The Newborn Hugger™ differs from the baby cushion of the previous version in two ways: 1. Its design features supportive cushions on the sides in the bottom and back area to give babies better side-stability and a more snug and comfortable fit. The side cushions in the back area also feature EPS to give additional protection in a side impact. 2. The wedge of the Newborn Hugger™ is now placed in a way that it lifts the baby's back instead of the bottom, through which a more flat angle can be achieved. 詳しくはこちら

No, the Newborn Hugger™ cannot be purchased as an accessory, it is only available as a spare part to replace a damaged or lost Newborn Hugger™. 詳しくはこちら

詳しくはこちら

詳しくはこちら

安全上の理由から、このラベルは剥がさないでください。このラベルには重要な情報が記載されています。 ステッカーを剥がすと、塗装が傷んだり、糊が残ったりする可能性があります。 詳しくはこちら

The user guide is delivered with every Xplory® X chassis, seat and carry cot. However, you can also find the most recent version on our website on the different product pages. Feel free to reach out to our customer service team if you need a user guide from an older model. 詳しくはこちら

No, the CloudSleeper™ comes with an integrated pump. You will not need any additional or external tools to inflate it. Inflate by pushing with both hands down on the pump area or by using your foot. When inflating, remember to have the valve cap open on the pump and close the deflation valve at the opposite end. 詳しくはこちら