【ベビーセット】 背もたれ、ガードのシリアルナンバーは異なります。それぞれ以下の場所に記載されています。 背もたれ：裏側の中心部分 ガード：座ったときに右手側となるフックの裏側 数字と矢印が書いてある時計のようなマークが2個あります。 それぞれ矢印の差す数字を、左から右の順に読んだ3～4桁の数字がシリアルナンバーです。 【クッション】 洗濯表示などを記載しているタグが、複数縫いつけられています。最後部のタグにシリアルナンバーの記載があります。 【トレイ】 トレイの裏側に、数字と矢印が書いてあるマークが2つあります。 それぞれ矢印の差す数字を、左から右の順に読んだ3～4桁の数字がシリアルナンバーです。 詳しくはこちら

Due to the light weight of the Stokke® Home™ Cradle, our Stokke® designers developed the cradle without wheels. This is also beneficial with regards to the safety of the infant. 詳しくはこちら

詳しくはこちら

To keep your Stokke® Home™ Dresser clean, wipe it with a soft, damp (not wet!) cloth. Wipe down with a dry cloth until completely dry. Refrain from using a micro fiber cloth or household detergents as they may damage the finish of the crib. Colors may change if the products are exposed to sunlight. 詳しくはこちら

"The dimensions and weight of the Stokke® Home™ Dresser when packaged in the box are: Box 1 of 2 (weight 24kg (53 lbs) / L: 67cm (26,3’’) / W: 8cm (3,1’’) / H: 78cm (30,7’’)) Box 2 of 2 (weight 24kg (53 lbs)/ L: 57cm (22,4’’)/ W: 8cm (3,1’’) / H: 74cm (29,1’’)) When assembled, the measurements are as follows: L: 73 (28.5"") / W: 50cm (19.5"") / H: 88cm (34.5"") Weight: 40 kg /88 lbs (2 Boxes) " 詳しくはこちら

詳しくはこちら

"The Stokke® Home™ mattress cover can be hand-washed at 40 °C. Make sure to stretch it to size whilst still wet. Do NOT use a tumble dryer. The foam filling can be hand washed at 60 °C and/or rinsed with warm water. We recommend the use of protection sheets in case of little spills or accidents. " 詳しくはこちら

詳しくはこちら

• Always make sure the bumper is fixed correctly and tightly to avoid sagging. Check frequently that all the bumper ties are firmly tied to the crib rails. Please re-tie if necessary. • To ensure optimum airflow, always ensure the child is not sleeping with their face in direct contact with the bumper. • Remove the bumper when the child can sit unaided or pull themselves up to a standing position. 詳しくはこちら

The standards the Stokke® Bumpers comply with are: • ASTM F1917-12 – “Infant Bedding and Related Accessories” • BS 1877-10:2011+A1:2012 – “Domestic bedding. Specification for mattresses and bumpers for children’s cots, perambulators and similar domestic articles” • The above standards specifically aim to ensure safe design and sufficient care instructions for safe and proper use of a bumper. • Stokke® Bumpers have been tested for CO2 retention and results show no increase of CO2 in the crib environment with a correctly fitted Stokke® Bumper. • Stokke® Bumpers are designed with specific dimensions and materials to ensure optimum air flow. 詳しくはこちら

All textiles can be ironed, except Stokke® Home™ Bed Protection Sheet. You will find this information on the care label attached on each product. 詳しくはこちら

Yes, Stokke® Home™ Half Bumper fits on both Stokke® Sleepi™ and the Stokke® Home™. 詳しくはこちら

詳しくはこちら

Stokke® iZi Go Modular™ by Besafe® has an integrated adapter so you do not need any additional adaptors or parts to use it in conjunction with a Stokke® Crusi, Scoot and Trailz. Please note that the Stokke® iZi Go Modular™ by Besafe® can be attached to Xplory starting with serial number 24770 and above. 詳しくはこちら

Stokke® iZi Go Modular™ by Besafe® can be used up to when the child is 75 cm (approximately 12 months). 詳しくはこちら

We suggest to keep both pillows for the first 4 months. When the child is between 4-6 months the pillow placed under the insert can be removed. When the child is 6 months the pillow which is part of the baby insert can be removed as well. 詳しくはこちら