Gennemse indkøbskurven
Luk
Du har ingen varer i din indkøbsvogn
JetKids™ by Stokke® CloudSleeper™ Oppustelig barneseng
NyRejseseng til børn til brug hjemme og på farten.
Bonusprodukt
https://www.stokke.com/DNK/da-dk/584602.html
- Med Mickey Celebration mønster – et muntert Mickey Mouse design med klare farver og sjov konfetti
- Alt-i-en rejseseng til børn med integreret pumpe, faconsyet netbetræk og taske til nem transport og opbevaring.
- Sengerande langs begge sider sørger for, at dit lille barn kan sove trygt, når I er på farten.
- Leveres med et faconsyet netbetræk, som regulerer dit barns kropstemperatur for optimal komfort.
- Giv din hverdag lidt ekstra magi, også når du ikke er hjemme.
Variations
SalgsprisDKK 969,00,
Products
Oversigt
Sådan bruges den:
FAQs (ofte stillede spørgsmål)
Reservedele
(inklusive skatter)
SalgsprisDKK 969,00,
I alt
Produktdetaljer
Rejseseng til børn til brug hjemme og på farten.
CloudSleeper™ er en alt-i-en oppustelig rejseseng til småbørn og børn på 3 år og derover. Det er en brugervenlig rejseseng, der er så lille, at den kan være i din rygsæk eller håndbagage. Det er en let alt-i-en seng uden løse dele.
Oppustelige rejsesenge til børn er en ægte innovation
- Oppustelig madras af holdbar TPU-belagt nylon. Samme materiale som en luksus luftmadras
- Sengerande langs begge sider giver småbørn ekstra beskyttelse. når de sover
- Faconsyet lagen med mesh-betræk bidrager til at regulere kropstemperaturen og giver dit barn ekstra støtte
- Vandafvisende betræk til nem rengøring
- Med en integreret pumpe kan sengen pustes op med hånden eller foden
- Tansporttaske med dobbelt lynlås til nem opbevaring og transport
X
En seng til rejsebrug
ALT-I-EN KOMFORTABEL OG KOMPAKT REJSESENG
1
Mesh-betræk
Det bløde mesh-betræk, der følger med denne rejseseng til børn, er fremstillet af åndbart stof og hjælper med at regulere kropstemperaturen og give ekstra støtte, så dit barn kan sove godt, uanset hvor I er.
2
Integreret pumpe
Vores luftmadras har en integreret pumpe, der er indbygget direkte i TPU-bunden, og ingen løse dele at montere, når du skal puste den op til de små. Du kan pumpe denne seng op manuelt på under 60 sekunder.
3
Transporttaske
Sengen kan foldes sammen til en smart, kompakt 'taske', der gør den nem at opbevare og bære. Tasken er designet med lynlåse i to lag, så du kan vælge at presse rejsesengen sammen til en endnu mindre størrelse, når du mangler plads.
Til brug hjemme og ude
Til overnattende børn, venner og familie
Camping / Glamping
Hotelophold, kahyt og fritidshus
Autocampere
Specifikationer
Produktstørrelse (cm/in): 150 x 75 x 17 / 59.1 x 29.5 x 6.7 Vægt (kg/lbs): 1.4 / 3.1 Velegnet til alder: fra 36 (måneder) Velegnet til vægt (kg/lbs): op til 68 / 149.9
Materialedetaljer
Materialer: TPU-madras: Stærk, holdbar og letvægts 40D nylon. Den er TPU-belagt og PVC-fri. Topbetræk: Åndbart og behageligt mesh (3D Mesh) - 100 % polyester. Bundbetræk: Stærkt, holdbart og vandafvisende 100 % polyester (PU-belagt)
Kompatibilitet
-
Passer til JetKids by Stokke® BedBox
Hvad medfølger?
- this item is included Transporttaske med dobbelt lynlås
- this item is included Faconsyet lagen med mesh-betræk og vandafvisende bundbetræk
- this item is included TPU-belagt nylonbundmadras
JetKids™ by Stokke® CloudSleeper™ Oppustelig barneseng i sociale
Sådan bruges den: / Dokumenter
Vedligeholdelse
- TPU-madras: Tør snavs eller pletter af med en våd klud.
- Mesh-betræk: Tåler maskinvask op til 30 grader C.
- Når det skal tørre, anbefaler vi, at du lægger betrækket på bundmadrassen, pumper madrassen op og lader det tørre naturligt, inden du pakker madrassen ned i tasken.
Downloads
Samlingsinstruktioner
FAQs (ofte stillede spørgsmål)
-
What is the CloudSleeper™?
The CloudSleeper™ is the compact and lightweight children's travel bed from 3 years and above. It is a travel bed for home and away, an inflatable bed with no loose parts and an integrated pump.
-
How does the packing cube work?
The packing cube of the CloudSleeper™ is a design that allows you to compress the CloudSleeper™ even more for packing and ease of transport. It is designed with double layered zipper. By closing both layers, you can push more air out of the CloudSleeper™ and compress it to the smallest size.
-
Where can I use the CloudSleeper™?
Because of its compact and light weight design, the CloudSleeper™ is the perfect bed for indoor and outdoors activities at home and away such as sleepovers, camping, family reunions, hotels, and others.
-
Can I use the CloudSleeper™ outdoors as well?
The CloudSleeper™ has a removable and machine-washable cover, made of water repellent material on the bottom side and comfortable air mesh on top. These materials allow you to use the CloudSleeper™ on both indoor and outdoor adventures.
-
What are the materials of the CloudSleeper™?
The inflatable base is made of light and durable TPU-coated nylon, similar to what is used on high-end hiking mattresses, for example. The removable and machine washable cover is made of polyester air mesh on the top, combined with water repellent polyester on the bottom side.
-
How do I clean the CloudSleeper™?
You can wash the cover in the washing machine at a recommended 30 degrees Celsius cycle. We recommend 30 degrees Celsius (cold wash). However, 40 degrees Celsius (warm wash) is also an option. To dry, we recommend putting the cover on the base, inflate it, and let dry while inflated. To clean the inflatable base, wipe off any dirt or stains using a wet cloth.
-
How do I inflate the CloudSleeper™?
There is clear instruction on the packing cube. After you receive the product, take out the TPU base and the air mesh cover, unfold them, put the air mesh cover over the base, open the valve cap on the pump and close the valve cap at the opposite end and then use your both hands or foot to push the integrated pump to pump the mattress up. You can also find clear how-to videos on our youtube channel.
-
How long does it take to inflate?
The inflation takes around 1 minute. All in all, removing the CloudSleeper™ from the compression cube, unfolding, and inflating it would typically take approximately 2 minutes.
-
Do I need a pump to inflate the CloudSleeper™?
No, the CloudSleeper™ comes with an integrated pump. You will not need any additional or external tools to inflate it. Inflate by pushing with both hands down on the pump area or by using your foot. When inflating, remember to have the valve cap open on the pump and close the deflation valve at the opposite end. There is also a handy quick guide on the packing cube.
-
How do I pack it down after I use the CloudSleeper™?
After usage, simply open the valve cap at the opposite end of the pump and roll up the mattress firmly one time to deplete all air. Then unroll and fold along the numbered and dotted lines printed on the back. Finally, put the mattress back into the packing cube and close the packing cube with the zipper. If needed, you may also use the additional zipper to compress the CloudSleeper™ further.
-
How long does it take to pack the CloudSleeper™ down?
It takes around 2 minutes to pack down.
-
What comes with CloudSleeper™?
CloudSleeper™ includes an inflatable base, a removable air mesh cover with water repellent fabric on the bottom side, and a custom-made packing cube. Both the cover and packing cube come with printed instructions for usage and packing.
-
How long does the CloudSleeper™ stay inflated?
In normal circumstances, the CloudSleeper™ stays inflated for weeks and should not leak at all. However, as air expands with increasing temperature and contracts when cooled, you might experience some variation in firmness when, for example, moving the CloudSleeper™ from a hot to a cold area and vice versa. You can adjust the firmness at any time by giving it a few pushes on the pump area or releasing some air.
-
What do the dotted lines in the back of the CloudSleeper™ do?
These are for making it easy and quick to stow the CloudSleeper™ back into the packing cube. After use, open the deflation valve and roll up the CloudSleeper™ one time, starting from the pump side. Then unroll, and fold the CloudSleeper™ along the dotted lines, starting with lines number 1 and 2.
-
What is the warranty for the CloudSleeper™?
CloudSleeper™ comes with a global warranty of 2 years from the day of purchase.
-
Will the CloudSleeper™ fit inside the BedBox?
Yes! The CloudSleeper™ fits perfectly inside the BedBox and still leaves some space available for some of your child’s personal belongings.
-
What is the age range for the CloudSleeper™?
The CloudSleeper™ is designed for children three years and up to approximately 10 years (150cm / 4′ 11″).
-
Why is it that the CloudSleeper™ can only be used from 3 years?
Babies typically have other solutions, like foldable travel cots, cribs etc. We wanted to make a travel bed for children from three years and upwards as we saw the lack of good products in the market for this age group. In addition, the few options we saw were old-fashioned plastic/PVC inflatable beds, which are bulky, heavy, and not very suitable for travel.
-
My child is not three years old yet, can he/she use the CloudSleeper™?
No, we do not recommend that. The CloudSleeper™ is tested for its intended user age, which is 3 years and upwards.
-
How much does the CloudSleeper™ weight?
The CloudSleeper™ weights only 1.4kgs/3lbs.
-
How much weight can the CloudSleeper™ take?
The CloudSleeper™ is tested for a max weight of 150lbs/68kg.
-
What is the measurement for the CloudSleeper™ when it is inflated?
The CloudSleeper™ when inflated is 150 x 75 x 17 cm / 59 x 29.5 x 6,7 inches.
-
What is the measurement for the CloudSleeper™ when it is packed down?
When you pack the CloudSleeper™ down in the packing cube and fully compress it, it is 38 x 28 x 10 cm / 15 x 11 x 4 inches.
-
JetKids™ by Stokke® CloudSleeper™
Vist for nylig
Bonusprodukt